No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an REE

Installing an REE

Scenarios

Install an REE to replace the faulty one.

Prerequisites

Conditions

No special condition is required for this operation.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag
  • Phillips screwdriver

Hardware

Spare REE

Procedure

  1. Turn off the PDU switch that corresponds to the REE.
  2. Take the spare REE out of its ESD bag.
  3. Loosen the screws on the four corners. See step (1) in Figure 6-16.
  4. Remove the mounting ear cover. See step (2) in Figure 6-16.

    Figure 6-16 Removing the mounting ear cover

  5. Slide the REE into the cabinet as far as it will go. See step (1) in Figure 6-17.
  6. Tighten the screws on the four corners to secure the REE. See step (2) in Figure 6-17.

    Figure 6-17 Installing an REE

  7. Install all modules in the REE.

  8. Install an FPC. For details, see Installing an FPC.
  9. Install the front bezel. For details, see Installing a Front Bezel.
  10. Install the front acoustic door. For details, see Installing an Acoustic Door.
  11. Connect all cables to the REE.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 98827

Downloads: 248

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next