No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Acoustic Doors

Installing Acoustic Doors

Unpacking Acoustic Doors

  • Precautions
    • Unpack acoustic doors carefully to avoid equipment damage.
    • At least two people are required to handle an acoustic door.
    • Once an acoustic door is unpacked, you are advised to install it immediately. If the acoustic door will be installed later, place shock-absorbing materials under it.
    • If additional transportation is required, store all packaging materials (including moisture-proof bags and packages) for future use.
  • Preparations

    Check that:

    • The packages have been delivered to the installation site.
    • The packages are in good condition.
    • The total number of packages matches the attached packing list.

If the packages or components inside are damaged (for example, soaked or rusty), stop unpacking, take photos, and report the problem to the local Huawei office.

  • Tools
    • Box cutter
    • Phillips screwdriver
    • Protective gloves
  1. Cut the ties that secure the packages, as shown in step (1) in Figure 3-73.
  2. Move the package to the floor, as shown in step (2) in Figure 3-73.
  3. Remove the top cover, as shown in step (3) in Figure 3-73.
  4. Lift the foam on the top, as shown in step (4) in Figure 3-73.
  5. Lift the acoustic door from the foam on the bottom, as shown in step (5) in Figure 3-73.
  6. Take the acoustic door out of the plastic bag, as shown in step (6) in Figure 3-73.
Figure 3-73 Unpacking acoustic doors

Installing Acoustic Doors

  • Precautions

    At least two people are required to install an acoustic door.

  • Preparations

    Distinguish the front acoustic door from the rear acoustic door. The front acoustic door has an LCD while the rear acoustic door does not.

  • Tools
    • Phillips screwdriver
    • Protective gloves
    • Cable cutter
  1. Lift the acoustic door.
  2. Align the pivots with the hinges in the cabinet, and insert the pivots into the hinges simultaneously, as shown in Figure 3-74.
    Figure 3-74 Installing an acoustic door

  3. Connect the ground cable to the ground screw on the acoustic door. See (1) in Figure 3-75.
  4. Connect the cable on the acoustic door to the CME. See (2) in Figure 3-75.
Figure 3-75 Connecting cables on an acoustic door

Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105256

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next