No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RAID

Configuring RAID

If an SCE has only one physical partition, you must install a RAID controller card in the RAID 1 slot.

The 9016 supports only LSISAS3108 controller cards and RAID configuration only in Unified Extensible Firmware Interface (UEFI) mode.

For details about how to configure RAID, see KunLun Mission Critical Server V100R001 RAID Controller Card User Guide.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105199

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next