No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an Acoustic Door

Removing an Acoustic Door


Remove an acoustic door if it has failed.



At least two persons are required to remove an acoustic door because the door is heavy.


No data preparation is required for this operation.


  • ESD gloves
  • Packaging materials, for example, an ESD bag
  • Phillips screwdriver


  1. Remove all cables from the acoustic door.

    Before removing an acoustic door, determine whether the door is a front or rear one. The front acoustic door has an LCD and a cable.

  2. Lift the acoustic door until the two pivots are separated from the hinges. See Figure 6-18.
  3. Place the removed acoustic door in an ESD bag.

    Figure 6-18 Removing an acoustic door

Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104848

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next