No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Data

Default Data

Table 5-2 provides the default IP addresses of the central management consoles (CMCs).

Table 5-2 Default CMC IP addresses

Name

Default Value

Static IP address

  • CMC 1: 192.168.2.1
  • CMC 2: 192.168.2.2
  • Subnet mask: 255.255.255.0

Floating IP address

  • Floating IP address: 192.168.2.3
  • Subnet mask: 255.255.255.0

Default logical partition IP address

  • Default IP address: 192.168.2.4
  • Subnet mask: 255.255.255.0

Table 5-3 provides details of the default CMC users.

Table 5-3 Default CMC users

User Name

Default Password

Type

Status

Usage Scenario

root

Huawei12#$

Administrator

Enabled

Logging in to the CMC over the WebUI or Secure Shell (SSH) by using a serial port or network port

None

Huawei12#$

Administrator

Enabled

Logging in to U-Boot through a serial port, without specifying a user name.

Table 5-4 provides details of the default baseboard management controller (BMC) users.

BMC users can log in to the BMC of a system compute enclosure (SCE) to manage the SCE.

NOTE:

When possible, use the CMC instead of the BMC for SCE management.

Table 5-4 Default BMC users

User Name

Default Password

Type

Status

Usage Scenario

root

Huawei12#$

Administrator

Enabled

Logging in to the BMC by using SSH, Serial over LAN (SOL), or a serial port

None

Huawei12#$

Administrator

Enabled

Logging in to U-Boot through a serial port, without specifying a user name.

Note: The BMC must use internal IP addresses in a range of 172.31.1.129 to 172.31.1.132. Each IP address maps to a basic partition unit (BPU). You can log in to the CMC to query the mapping between IP addresses and BPUs.

Table 5-5 lists default users of Hypervisor.

Table 5-5 HyperVisor default list

User Name

Default Password

Type

User Status

Usage Scenario

root

Huawei12#$

Administrative User

Enabled

Used for logging to the Hypervisor CLI through local KVM.

klsftp

Huawei12#$

Common user

Enabled

Used to log in to Hypervisor through SFTP to upload or download files.

klupgrade

Huawei12#$

Common user

Enabled

Used to log in to the Hypervisor CLI through SSH/kvm.

Note: The SSH and SFTP login permissions of the root user are disabled by default, and the KVM and SSH login permissions of the klsftp user are disabled by default.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105434

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next