No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Switch Module

Installing a Switch Module

Scenarios

Install a switch module in any of the following scenarios:

  • A switch module has failed.
  • A RAID controller card has failed.
  • A supercapacitor in the switch module has failed.

Prerequisites

Conditions

No special condition is required for this operation.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Hardware

Spare switch module

Procedure

  1. Power off the physical partition where a switch module is to be installed. For details, see Powering Off the 9016.
  2. Take a spare switch module out of its ESD bag.
  3. Install all modules in the switch module.

  4. Insert the switch module into the REE as far as it will go. See step (1) in Figure 6-118.
  5. Close the switch module ejector levers until the switch module is latched. See step (2) in Figure 6-118.

    Figure 6-118 Installing a switch module

  6. Install an FPC. For details, see Installing an FPC.
  7. Install an Front Bezel. For details, see Installing a Front Bezel.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105683

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next