No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Battery

Installing a Battery


Install a battery in any of the following scenarios:

  • A battery has failed.
  • A battery needs to be replaced with a new model.



No special conditions are required for this operation.


No data preparation is required for this operation.


  • ESD gloves
  • Packaging materials, for example, an ESD bag


Spare battery


  1. Turn off the switches on the PDUs corresponding to the system compute enclosure (SCE) where the battery is to be installed.
  2. Take the spare battery out of its ESD bag.
  3. Hold the battery with the side marked with text facing upwards, insert the left end of the battery into the slot, and gently press down the battery until it is properly installed in the slot. See Figure 6-110 .

    Figure 6-110 Installing a battery

Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 121547

Downloads: 260

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next