No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an NI Cable

Removing an NI Cable

Operation Scenario

Remove a node interconnect (NI) cable if it has failed or not properly connected.

Prerequisites

Conditions

You have determined the cabinet number and location of the server from which an NI cable is to be removed.

Before removing an NI cable, ensure that the service system is powered off to avoid equipment damage and personal injury due to an incorrect or loose connection.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Procedure

  1. Pinch the connector on the NI cable and gently push the connector inward. See step (1) in Figure 6-153.
  2. Hold the plastic ring-pull using your index finger, and push out the connector in the arrow direction. See step (2) in Figure 6-153.
    Figure 6-153 Removing an NI cable

  1. Place the removed NI cable in an ESD bag.

  1. After removing an NI cable, wait for 30 seconds before you power on the service system.
  2. Take proper measures to protect the connector of the removed NI cable to avoid deformation due to impact.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 85416

Downloads: 245

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next