About This Document
Purpose
This document describes alarms of KunLun mission critical servers in terms of the meaning, impact on the system, possible causes, and solutions.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Command Conventions
The following table defines the meanings of bladeN (Nis an integer from 1 to 8).
BladeN |
Mapping |
Description |
|---|---|---|
Blade 1 |
SCE 1 - BPU B |
Basic partition unit (BPU) B of system compute enclosure (SCE) 1 |
Blade 2 |
SCE 1 - BPU A |
BPU A of SCE 1 |
Blade 3 |
SCE 2 - BPU B |
BPU B of SCE 2 |
Blade 4 |
SCE 2 - BPU A |
BPU A of SCE 2 |
Blade 5 |
SCE 3 - BPU B |
BPU B of SCE 3 (available only for the KunLun 9032) |
Blade 6 |
SCE 3 - BPU A |
BPU A of SCE 3 (available only for the KunLun 9032) |
Blade 7 |
SCE 4 - BPU B |
BPU B of SCE 4 (available only for the KunLun 9032) |
Blade 8 |
SCE 4 - BPU A |
BPU A of SCE 4 (available only for the KunLun 9032) |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 10 (2020-09-27)
ALM-3700001F CMC Failed to Detect BMC (SCE-LPM) Heartbeat Signals is updated..
Issue 09 (2018-12-26)
ALM-00000083 Insufficient PCIe MMIO Resources (Critical Alarm) is added.
Issue 08 (2018-09-25)
ALM-0x0100003F Failed to Read Memory Temperature is added.
Issue 07 (2018-03-20)
ALM-2300002F REE Power Failure and ALM-23000029 Failed to Obtain the ID of an I/O Module are added.
Issue 06 (2017-11-20)
REE alarms are added.
Issue 05 (2017-05-12)
ALM-28000003 CPLD Signal Cable Connection Exception is added.
Issue 04 (2017-02-21)
ALM-3700002B SSL Certificate Expiring and ALM-3700002D SSL Certificate Expired are added.
Issue 03 (2017-01-17)
ALM-1700003F CMC External Network Communication Failed is updated.
Issue 02 (2016-10-29)
All the alarms are updated.
Issue 01 (2016-01-25)
The issue is the first official release.