No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun Mission Critical Server V100R001 CMC Alarm Handling 09

This document describes KunLun 9016 and 9032 alarms in the CMC, in terms of their meanings, impact on the system, possible causes, and handling suggestions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-37000045 Incorrect Physical Partition Mode

ALM-37000045 Incorrect Physical Partition Mode


Alarm message:

The system product model is incompatible with the current physical partition mode.

This alarm is generated when the system physical partition mode does not match the product model.


Alarm ID

Alarm Severity

Auto Clear







Alarm Severity

Indicates the alarm severity.

Alarm Source

Indicates the alarm source.


Indicates the event body for which an alarm is generated.


Indicates the time when an alarm is generated.


Provides an alarm description.

Event Code

Indicates the event code of an alarm.

Impact on the System

  • Some physical partitions are unavailable.

Possible Causes

  • The product model is switched, but the hardware partition mode is not switched accordingly.


  1. Log in to the CMC WebUI as an administrator, click Switch Physical Partition Mode on the KPAR page, and check whether the operation is successful.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Make sure that the conditions for physical partition mode switching are met based on the displayed message, log in to the CMC WebUI again to switch the physical partition model, and check whether the physical partition model is switched successfully.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Contact Huawei technical support.


After the fault is rectified, the system automatically clears the alarm.

Updated: 2018-12-29

Document ID: EDOC1000111849

Views: 117400

Downloads: 82

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next