No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun Mission Critical Server V100R001 CMC Alarm Handling 09

This document describes KunLun 9016 and 9032 alarms in the CMC, in terms of their meanings, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-12000015 Air Inlet Temperature Is Lower than the Undertemperature Threshold

ALM-12000015 Air Inlet Temperature Is Lower than the Undertemperature Threshold

Description

Alarm message:

The air inlet temperature (xx degree C) is lower than the undertemperature threshold (xx degree C).

Attribute

Alarm ID

Alarm Severity

Auto Clear

12000015

Major

Yes

Parameters

Name

Meaning

Alarm Severity

Indicates the alarm severity.

Alarm Source

Indicates the alarm source.

Subject

Indicates the event body for which an alarm is generated.

Time

Indicates the time when an alarm is generated.

Description

Provides an alarm description.

Event Code

Indicates the event code of an alarm.

Impact on the System

Undertemperature affects component performance and server operations.

Possible Causes

  • The ambient temperature is lower than 10°C (50°F).

Procedure

  1. Check that the air conditioners in the equipment room are working properly. Raise the ambient temperature for the server or move the server to a place at a higher temperature. Ensure that the ambient temperature is in the range of 10°C to 30°C (50°F to 86°F). Then check whether the alarm is cleared automatically.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Contact Huawei technical support.
Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000111849

Views: 60942

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next