Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an FC Card Driver on Linux
Procedure
- Download a Linux FC card driver from the official QLOGIC website. For example, click the link (using RHEL 6.7 as an example) in the red box in Figure 17-14.
- Copy the driver installation package to the server and run the tar command to decompress the installation package, as shown in Figure 17-15.
- Go to the extras directory and run the command shown in Figure 17-16 to add permissions of the build.sh file.
- Change from the extras directory to the driver root directory, and run the ./extras/build.sh install command, as shown in Figure 17-17.
