Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Abnormal VM Startup When SAN BOOT Is Enabled
Symptom
Multiple LUNs are installed with different operating systems. After suse11_sp4_64 is installed on a LUN and the VM attempts to start from the LUN, the VM startup is abnormal, as shown in Figure 4-39.
Cause Analysis
By default, the suse11_sp4_64 installation program installs the GRUB on the first LUN. Therefore, Partitioningand Booting need to be specified during the installation.
Solution
- Click Partitioning, select a LUN on which the system is to be installed, for example, LUN5, and click next.Figure 4-40 Selecting a LUN
- Select Use Entire Hard Disk. You can also manage partition on the LUN as required.Figure 4-41 Preparing Hard Disk
- Click the Boot Loader Installation tab, and click Boot Loader Installation Details.Figure 4-42 Boot Loader Settings
- Retain the LUN on which GRUB is to be installed, delete other LUNs, and click Installto continue with the installation.Figure 4-43 Installation Settings
