Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

10

2025-05-15

• Added Installing Ambient T/H Sensors and Cables (33010516).
• Optimized the installation procedure in Installing Ambient T/H Sensors and Cables (02312PBL or 02310NBS).
• Added check items in Verifying the Installation.
• Added User Names and Initial Passwords.
• Added Setting the Ambient T/H Sensor (33010516).
• Deleted the T/H sensor (02312PBL-002) in Setting the Ambient T/H Sensor (02312PBL or 02310NBS).

09

2025-01-15

• Updated MDU.
• Updated Installing Ambient T/H Sensors and Cables (02312PBL or 02310NBS).
• Updated Routing Cables (UPS5000-A-200K-ST).
• Updated Routing Cables (UPS5000-A-200K-FT).
• Updated Routing Cables (UPS5000-A-200K-FT, Isolation Protection).
• Updated Routing Cables (UPS5000-A-300KTTL).
• Updated Routing Cables (UPS5000-A-300K-STT).
• Updated Routing Cables (UPS5000-A-300K-STT, Isolation Protection).
• Updated Routing Cables (300K-FT, 400K, 500K, 600K).
• Updated Routing Cables (800K).
• Updated Initial Startup.
• Updated Setting the Ambient T/H Sensor (02312PBL or 02310NBS).

08

2024-09-30

• Updated Dry Contact Card.
• Updated Installing Ambient T/H Sensors and Cables (02312PBL or 02310NBS).
• Updated Power-On.
• Updated Installing UPS Cabinets (200K, 300K).
• Updated Installing the UPSs.

07

2024-02-21

• Updated Product Appearance (200K, 300K) and Product Appearance (300K-FT, 400K, 500K, 600K, 800K).
• Updated Monitoring Interface Card.
• Updated Optional Components (200K, 300K) and Optional Components (300K-FT, 400K, 500K, 600K, 800K).
• Updated Installing Ambient T/H Sensors and Cables (02312PBL or 02310NBS).
• Updated Sealing Cabinets.
• Updated Setting the Ambient T/H Sensor (02312PBL or 02310NBS).
• Updated Starting the Inverter.

06

2023-08-01

• Updated the port definitions of the dry contact card.
• Updated the section "Monitoring Interface Card."
• Updated the section "Technical Specifications."
• Updated the recommended specifications of power cables.
• Added the section "SPD."
• Added operations related to parallel connection.
• Updated the sections related to the temperature and humidity (T/H) sensor.
• Updated the section "Installing a Remote EPO Switch."
• Updated the sections "Verifying the Installation" and Sealing Cabinets."
• Updated the section "Starting the Inverter."
• Added operations related to parallel connection.
• Updated the section "Routine Maintenance."
• Updated the section "UPS Troubleshooting."
• Added the section "FAQ."

05

2020-04-27

Updated some monitor display unit (MDU) screenshots.

04

2019-11-11

Added descriptions about the SNMP in the site configuration section.

03

2019-02-15

Added the isolation protection model.

02

2018-11-30

Updated some MDU screenshots.

01

2018-03-05

This issue is the first official release.