No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

WLAN Product Interoperation Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Continue to Access the Original Page After Successful Portal Authentication?

How Do I Continue to Access the Original Page After Successful Portal Authentication?

Question

How do I continue to access the original page after successful Portal authentication?

Answer

When forcible switching is disabled, the web browser switches an authenticated end user to the URL requested before the authentication. The AC sends the URL to the Portal server, which parses the URL to obtain the specific URL. For example, an end user wants to access http://bbs.example.com. After you specify the URL address parameter (url) on the AC, the Portal server receives http://Portal server IP address:8080/portal?url=http://bbs.example.com, and the web browser pushes http://bbs.example.com to the authenticated end user.

To access the original page after successful Portal authentication, you need to perform the following configurations on both the AC and Agile Controller-Campus.

  • Configuration on the AC

    When configuring the Portal server on the AC, configure the AC to send the URL that the user accesses as the parameter to the Portal server.
    <AC> system-view
    [AC] url-template name myurl
    [AC-url-template-myurl] url http://192.168.1.203:8080/portal
    [AC-url-template-myurl]  url-parameter redirect-url url
    #The Portal server obtains the URL to be switched to based on the url parameter. The AC must send the URL that the user accesses as the parameter to the Portal server. Do not change the parameter name url.
    [AC-url-template-myurl] quit
    
    
    [AC] web-auth-server portal
    [AC-web-auth-server-portal] server-ip 10.1.1.1
    [AC-web-auth-server-portal] port 50200
    [AC-web-auth-server-portal] shared-key simple Admin@123
    [AC-web-auth-server-portal] url-template myurl
    
    [AC-web-auth-server-portal] quit
    [AC] interface vlanif 30
    [AC-Vlanif30] web-auth-server portal direct

  • Configuration on the Agile Controller-Campus V100R002C00

    When configuring the Portal page push rule on the Agile Controller-Campus, set Page displayed after successful authentication to Continue to visit the original page.

  • Configuration on the Agile Controller-Campus V100R001C00

    When configuring the Portal page push rule on the Agile Controller-Campus, choose Policy > Permission Control > Page Customization > Page Customization, and set URL Field Name to url.



Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000113779

Views: 55848

Downloads: 1757

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next