No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network

Network

The EasyDeploy function simplifies network configuration and implements remote deployment and centralized management of network devices.

To configure the EasyDeploy function, determine roles of devices first. After a device is configured as the Commander, you can view client information, configure and upgrade clients, and view power consumption of the device and the entire network on the Commander.
NOTE:

The network area is available only in the stand-alone mode.

The device that cannot work as the Commander can only be configured as the client, and the Summary, Deployment, Batch Configuration, and Power Consumption menus are not available.

If the topology function is not enabled on the Commander, the Summary, Deployment, and Batch Configuration menus are not available.

Table 1-184 lists the device models and versions that support the EasyDeploy function.

Table 1-184  Supports for the EasyDeploy function
Role Product Model Version Maximum Number of Managed Clients Description
Commander

S5700HI, S5710HI, and S6700EI

V200R003C00 to V200R005C00 128

The S2720EI, S2750EI, S5700S-LI, S5720S-LI, S5710-X-LI, S5700LI, S5720LI, S5720SI, and S5720S-SI can only work as a client and cannot work as a Commander.

S5700EI, S5710EI, and S5700SI

64
S5720HI V200R006C00 and later 128
S5720EI V200R007C00 and later 128
S6720EI V200R008C00 and later 128
S6720S-EI V200R009C00 and later 128
Client
  • All fixed switch models except the S1720GFR
  • All modular switch models
V200R003C00 and later -
  • If the clients are chassis switches, EasyDeploy can only be applied to the batch upgrade and batch configuration scenarios.
  • If the clients are fixed-configuration switches, EasyDeploy applies to the batch upgrade, batch configuration, unconfigured device deployment, and faulty device replacement scenarios.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 38139

Downloads: 995

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next