No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring the Commander and Client Roles

Example for Configuring the Commander and Client Roles

Networking Requirements

On an enterprise network shown in Figure 1-286, EasyDeploy is deployed to implement automatic configuration, unified deployment, and unified maintenance of devices. The user requires that SwitchA serve as the Commander and SwitchC, SwitchD, and SwitchE serve as clients to form an EasyDeploy network.

Figure 1-286  EasyDeploy networking

Configuration Roadmap

  1. Log in to SwitchA through the web system and configure SwitchA as the Commander.

  2. Log in to SwitchC, SwitchD, and SwitchE through the web system and configure them as clients.

Procedure

  1. Log in to SwitchA through the web system and configure SwitchA as the Commander.
    1. Click Network in the function area. The Network page is displayed.
    2. In the navigation tree, click Role Configuration. The Role Configuration page is displayed.
    3. Click the Commander option button, as shown in Figure 1-287.

      Figure 1-287  Role Configuration

    4. Select an existing IP address from the IP address drop-down list box. Use the default UDP port.
    5. Click Apply. The configuration is complete.
  2. Log in to SwitchC, SwitchD, and SwitchE through the web system and configure them as clients.
    1. Click Network in the function area. The Network page is displayed.
    2. In the navigation tree, click Role Configuration. The Role Configuration page is displayed.
    3. Click the Client option button, as shown in Figure 1-288.

      Figure 1-288  Role Configuration

    4. Enter the Commander IP address, which must be the same as that configured on the Commander. Use the default UDP port.
    5. Click Apply. The configuration is complete.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 31270

Downloads: 977

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next