No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Trends

Trends

This subnode displays the CPU usage, memory usage, temperature, and port usage of the switch according to your selection.

Procedure

  1. Click Device Summary in the navigation tree to open the Device Summary page. For a stacked device, click the slot ID of the device to open the Board Information page.
  2. Click a port in the Bandwidth Utilization section to open the Trends page.
    1. Click the unfold button on the right of CPU Usage, and the CPU usage trend is displayed, as shown in Figure 2-33.

      Figure 2-33  CPU Usage Trend

    2. Click the unfold button on the right of Memory Usage, and the memory usage trend is displayed, as shown in Figure 2-34.

      Figure 2-34  Memory Usage Trend

    3. Click the unfold button on the right of Temperature, and the temperature trend is displayed, as shown in Figure 2-35.

      Figure 2-35  Temperature Trend

    4. Select an interface name from the drop-down list. Click the unfold button on the right of Bandwidth Utilization, and the bandwidth utilization trend of this interface is displayed, as shown in Figure 2-36.

      Figure 2-36  Bandwidth Utilization Trend

  3. Click Back on the upper right corner of the page, and the Device Summary page is displayed.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 37138

Downloads: 992

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next