No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Device Through the Web System for the First Time (S1720GFR)

Logging In to the Device Through the Web System for the First Time (S1720GFR)

When logging in to the S1720GFR with the factory settings for the first time, users can log in only through the Web system on the PC.

Context

To facilitate device maintenance and use, S1720GFR switches allow for the first login using the Web system.

Pre-configuration Tasks

Before logging in to a device through the Web system, complete the following tasks:

  • Power on the device.
  • Ensure that the device has only the factory settings.

Default Configuration

Table 1-2  Default configuration of the device
Parameter Default Setting
User name admin
Password admin@huawei.com
User level 15
Login IP address 192.168.1.253
NOTE:

With the factory settings on an S1720GFR, the default IP address of VLANIF 1 is 192.168.1.253. To prevent IP address conflict on the local network, users are advised to change the IP address of VLANIF 1 on the S1720GFR before constructing the network.

Procedure

  1. Connect the PC to the device.

    Connect the PC to any Ethernet interface on the device.

  2. Configure an IP address for the PC.

    To ensure that the PC and device have reachable routes to each other, configure an IP address on the same network segment with the device IP address for the PC.

  3. Log in to the device through Web system.

    Open the browser on the PC and access https://192.168.1.253. On the displayed Web system login page shown in Figure 1-1, enter the default user name admin and default password admin@huawei.com.

    Figure 1-1  First login page in the Web system
    NOTE:

    To log in to the EasyOperation Web system, you must use Microsoft Edge, Internet Explorer 11.0, Firefox 39.0 to 49.0, or Google Chrome 39.0 to 54.0. To log in to the Classic Web system, you must use Internet Explorer 11.0, or Firefox 39.0 to 49.0. If the browser version or browser patch version is not within the preceding ranges, the web page may not be properly displayed. Upgrade the browser and browser patch. In addition, the browser must support JavaScript.

  4. Access the password change page of the web system.

    On the web system login page, click GO or press Enter to access the password change page, as shown in Figure 1-2. Change the password and re-log in to the web system as prompted. You can manage and maintain the device after logging in to the web system.

    Figure 1-2  Password change page of the web system
    NOTE:
    • The password change page is displayed during the login process only the first time you log in to the web system.
    • The password change page is also displayed if your password will expire or has expired. To access the web system main page, you must change the password.
    • To improve security, a password must contain at least two types of the following: lowercase letters, uppercase letters, digits, and special characters (such as ! $ # %). In addition, the password cannot contain spaces or single quotation marks (').

  5. (Optional) Changing the Web login password.

    If the default password is used to log in to the device, a message is displayed prompting users to change the password, as shown in Figure 1-3. Click Confirm. Change the login password on the User Management page. To ensure security, users are advised to change the Web login password upon the first login to the device.

    Figure 1-3  Page prompting users to change the login password
    NOTE:

    A secure password should contain at least two of the following: lowercase letters, uppercase letters, numerals, special characters (such as ! $ # %). In addition, the password cannot contain spaces or single quotation marks (').

    After accessing the user management page, you can change the default user level. Only level 3 users and higher are administrators with management rights. Level 2 users and below are monitoring users. Administrator users have all operation rights of a web page, and monitoring users can only perform ping and tracert operations.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 37455

Downloads: 992

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next