No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Backing Up the Configuration File

Example for Backing Up the Configuration File

Networking Requirements

In Figure 1-267, back up the configuration file of the switch to a file server, so that the configuration file can be restored if the switch is damaged unexpectedly. Additionally, the configuration file can be downloaded from the file server to the switch if incorrect configurations cause abnormal functions.
Figure 1-267  Networking diagram of backing up the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Save the configuration file.
  2. Back up the configuration file.


  1. Click at the upper right corner after the preceding configuration; otherwise, the configuration that has not been saved will be lost upon reboot.
  2. Choose Maintenance > System Maintenance > System > File Management. The File Management page is displayed, as shown in Figure 1-268.

    Figure 1-268  File Management page

  3. Click in the line of the configuration file, and specify the directory to which the configuration file is to be backed up.


After the configuration file is backed up, query the backup file on the file server.

Follow-up Procedure

To restore the backup configuration file on the switch, upload the file on the File Management page. Then on the Upgrade page, specify the backup configuration file as the configuration file for the next startup and click Apply.

Updated: 2019-08-21

Document ID: EDOC1000114003

Views: 51719

Downloads: 1063

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next