No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rate Limiting

Rate Limiting

The rate limiting technology limits the rate of incoming and outgoing packets of an interface.

View Rate Limiting

You can view detailed information about interface-based rate limiting.

Context

You can select an interface to view the rate limiting information.

Procedure

  1. Choose QoS > Rate Limiting. The Rate Limiting page is displayed, as shown in Figure 2-173.
  2. Select one or all interfaces and click Query. Rate limiting information is displayed.

    Figure 2-173  Viewing rate limiting information on an interface

    NOTE:

    You can select only one interface to query its rate limiting.

Configure Rate Limiting

The interface-based rate limiting function is used to limit the rate of outgoing traffic or incoming traffic on a physical interface.

Context

Before sending traffic from an interface, you can configure rate limiting on the interface in the outbound direction. This function controls all outgoing packets.

Before sending traffic from an interface, you can configure rate limiting on the interface in the inbound direction. This function controls all incoming packets.

Procedure

  1. Choose QoS > Rate Limiting. The Rate Limiting page is displayed.
  2. Select the interface on which the rate limiting needs to be set and click Configure. The Configure Rate Limit page is displayed, as shown in Figure 2-174.

    Figure 2-174  Configure Rate Limit

    Table 2-100 describes the parameters on the Configure Rate Limit page.

    Table 2-100  Configure Rate Limiting

    Parameter

    Description

    Interface name

    Name of the interface on which rate limiting needs to be configured. You can select multiple interfaces.

    Inbound

    CIR

    Indicates the CIR in the inbound direction.

    CBS

    Indicates the CBS in the inbound direction.

    Outbound

    CIR

    Indicates the CIR in the outbound direction.

    CBS

    Indicates the CBS in the outbound direction.

  3. Click Inbound or Outbound and set the values of CIR and CBS.
  4. Click OK to complete the configuration.
  5. Select an interface where rate limiting needs to be deleted and click Cancel Limiting to delete the rate limiting configuration.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 32239

Downloads: 981

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next