No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System Configuration

System Configuration

The following sections describe the configurations of the system time and system information.

System Time

You can set the local time zone manually.

Context

To ensure effective communication between the switch and other devices, set the system time correctly.

Procedure

  1. Choose System Management > System Configuration > System Time in the navigation tree to open the System Time page, as shown in Figure 2-51.

    Figure 2-51  System Time

    Table 2-18 describes the parameters on the System Time page.

    Table 2-18  System Time

    Parameter

    Description

    Current time

    Indicates the current date and time.

    Reset System Time

    Time zone name

    Indicates the name of timezone.

    Offset

    Indicates the difference between the current time and Universal Time Coordinated (UTC). This parameter is used to increase or decrease the time difference.

    Set date and time

    Indicates the date and time that you want to specify. Select the Set date and time check box, and then click to set the date and time.

  2. Set the parameters.
  3. Click Apply, and then the new date and time are displayed.

System Settings

This section describes how to configure basic information about the system, such as the device name.

Procedure

  1. Choose System Management > System Configuration > System Settings in the navigation tree to open the System Settings page, as shown in Figure 2-52.

    Figure 2-52  System Settings

    Table 2-19 describes the parameters on the System Settings page.

    Table 2-19  System Settings

    Parameter

    Description

    Device name

    Indicates the device name.

    HTTP timeout interval

    Specifies the timeout of the HTTP connection.

  2. Set the parameters.
  3. Click Apply to complete the configuration.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 32412

Downloads: 981

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next