No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deployment

Deployment

On the Commander, you can perform unconfigured client deployment, faulty client replacement, and batch client configuration based on topology information.

Unconfigured Device Deployment

An unconfigured client can automatically load the configuration file and other files after it is powered on.

Procedure

  1. Click Network in the function area to display the Network page.
  2. Click Deployment in the navigation tree to display the Deployment page.
  3. Select an unconfigured device. The device information is displayed, as shown in Figure 1-240.

    Figure 1-240  Device information

  4. Click Set Running File to display the Set Running File page, as shown in Figure 1-241.

    Figure 1-241  Set Running File

  5. Set file information and click OK.

Faulty Device Replacement

When a client fails and needs to be replaced, specify file information of this client on the web page. Then the new device can use the specified files to start.

Procedure

  1. Click Network in the function area to display the Network page.
  2. Click Deployment in the navigation tree to display the Deployment page.
  3. Select the faulty device to be replaced. The device information is displayed, as shown in Figure 1-242.

    Figure 1-242  Device information

  4. Click Replace Running File and enter the file information in the displayed page.

Batch Upgrade

During routine network maintenance, you can update the software version and patch files of specified clients.

Procedure

  1. Click Network in the function area to display the Network page.
  2. Click Deployment in the navigation tree to display the Deployment page.
  3. Select the device to be upgraded and click Upgrade. Enter information about the upgrade system software and patch file on the displayed page.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 36555

Downloads: 990

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next