No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Intelligent Diagnosis (S5720HI)

Intelligent Diagnosis (S5720HI)

Context

When a fault occurs on a WLAN, you can use the Intelligent Diagnosis function to diagnose WLAN devices and the network and rectify the fault accordingly. For faults that you cannot rectify by yourself, export the diagnosis information and logs, then contact technical support personnel.

NOTE:

This node is only available in the NAC unified mode.

The web system is applicable to wireless service deployment on small- and middle-sized networks. For large-sized networks, use other network management systems, such as eSight.

Procedure

  • Configure diagnosis parameters for WLAN users.
    1. Choose Diagnosis > Intelligent Diagnosis. The Intelligent Diagnosis page is displayed.
    2. Click the Wireless user, AP, or LSW icon, choose the object to diagnose, and configure diagnosis parameters on the page that is displayed. For description of the parameters, see Table 1-147.

      Diagnosis objects can be wireless users, APs, and LSW.



      Table 1-147  Diagnosis parameters

      Parameter

      Description

      LSW

      Diagnosis mode

      Mode in which intelligent diagnosis is performed.

      Start time

      Start time of a fault.

      End time

      End time of a fault.

      Start diagnosis time

      Start time of the diagnosis when Diagnosis mode is set to Scheduled.

      AP

      Input type
      Mode in which APs to diagnose are selected.
      • MAC address: APs are selected based on MAC addresses.
      • IP address: APs are selected based on IP addresses.
      • AP name: APs are selected based on AP names.
      NOTE:

      You are advised to select APs to be diagnosed based on MAC addresses.

      Wireless User
      STA MAC address

      MAC address of a user. Enter the MAC address directly, or click and then find the user in the displayed user list.

    3. Click Start Diagnosis or OK.

      • If Diagnosis mode is set to Real-time, the system will start diagnosing the object after you click Start Diagnosis.
      • If Diagnosis mode is set to Scheduled, the system creates a scheduled diagnosis task after you click OK.

      After the diagnosis is complete, the system displays the result at the bottom left of the page and real-time connection information of the diagnosed object at the bottom right of the page.

    4. Click Suggestion to view the suggestions on how to rectify the fault.
  • View scheduled diagnosis tasks.
    1. Click . The Diagnosis list page is displayed.
    2. Click Non-diagnosed to view scheduled diagnosis tasks that have not started.
    3. Click Diagnosed to view scheduled diagnosis tasks that are complete.
  • Delete a scheduled diagnosis task.
    1. Click . The Diagnosis list page is displayed.
    2. To delete a scheduled diagnosis task that has not started, click Non-diagnosed and then .
    3. To delete a scheduled diagnosis task that is complete, click Diagnosed and then .
  • Export diagnosis information.
    1. Click Export Diagnosis Info.



    2. In the dialog box that is displayed, click OK.

      The system saves the diagnosis information to the device as txt files (overall_diaginfo_xxx.txt and autodiagnose-detail.txt), and prompts you to save the file to a local computer.

      • overall_diaginfo_xxx.txt: contains all diagnosis information on the device.
      • autodiagnose-detail.txt: contains the result of the current intelligent diagnosis.

    3. Save diagnosis information to your local computer.
  • Export logs.
    1. Click Export Logs.
    2. On the Export Logs page that is displayed, select the log files to export, and click OK.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 36813

Downloads: 990

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next