No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary

Summary

On the Summary page, you can view the network topology and device information, and save topology information on the device.

Context

To view network topology information, you must enable topology discovery on the Commander.

Procedure

  • View the network topology.
    1. Click Network in the function area to display the Network page.
    2. Click Summary in the navigation tree to display the Summary page. The network topology is displayed, as shown in Figure 1-238.

      Figure 1-238  Topology

  • Save the topology information.
    1. Click Network in the function area to display the Network page.
    2. Click Summary in the navigation tree to display the Summary page.
    3. Click Save Topology. When the message "Are you sure you want to overwrite and save the existing topology?" is displayed, determine whether to save the configuration according to your needs. (The topology information is saved in the ezop-topo.xml file on the Commander. You can compare this with the historical topology file to check the changes in the network topology.)
  • View device information.
    1. Click Network in the function area to display the Network page.
    2. Click Summary in the navigation tree to display the Summary page.
    3. Click to view device information.

      Figure 1-239  Device information

      Click Log In to display the web page of the device.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000114003

Views: 51381

Downloads: 1063

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next