No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP

AP

AP Wired Port Link Profile

Context

An AP wired port link profile allows you to perform link-layer management and configuration of AP wired interfaces.

Procedure

  • Create an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Click Create. The Create AP Wired Port Link Profile page is displayed.
    3. Enter the name of the new AP wired port link profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new AP wired port link profile is displayed.
    5. Set parameters for creating an AP wired port link profile. Table 1-196 describes the parameters for creating an AP wired port link profile.



      Table 1-196  Parameters for creating an AP wired port link profile

      Parameter

      Description

      AP Wired Port Link Profile

      Name of the AP wired port link profile, which cannot be modified.

      Port

      Whether to enable the AP wired interface.

      LLDP

      Whether to enable LLDP on the AP wired interface.

      Advertise basic TLV type
      Basic TLV that an AP is allowed to advertise in LLDPDUs.
      • All: An AP is allowed to advertise all basic TLVs in LLDPDUs.
      • Management-address: An AP is allowed to advertise Management address TLVs in LLDPDUs.
      • Port-description: An AP is allowed to advertise Port description TLVs in LLDPDUs.
      • System-capability: An AP is allowed to advertise System capability TLVs in LLDPDUs.
      • System-description: An AP is allowed to advertise System description TLVs in LLDPDUs.
      • System-name: An AP is allowed to advertise System name TLVs in LLDPDUs.
      CRC error alarm

      Whether to enable the alarm function for CRC errors on the AP wired interface.

      CRC error alarm threshold

      Alarm threshold for CRC errors on the AP wired interface.

      CRC error clear alarm threshold

      Clear alarm threshold for CRC errors on the AP wired interface.

      PoE Settings
      PoE Whether to enable the PoE function on the central AP.
      Power supply priority Power priority of PoE interfaces on the central AP.
      Forcible PoE power supply Whether to enable forcible PoE power supply on the central AP's interfaces.
      PD compatibility check Whether to enable PD compatibility check on the central AP.
      PoE power-off time range Effective PoE power-off time range on an interface.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Click the name of the AP wired port link profile that you want to modify. The AP Wired Port Link Profile page is displayed.
    3. Modify parameters in the AP wired port link profile. Table 1-196 describes the parameters for modifying an AP wired port link profile.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

AP System Profile

Context

To centrally manage and maintain multiple APs, add these APs to a group, set parameters in an AP system profile, and then reference the AP system profile in the AP group view.

Procedure

  • Create an AP system profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP System Profile. The AP System Profile List page is displayed.
    2. Click Create. The Create AP System Profile page is displayed.
    3. Enter the name of the new AP system profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new AP system profile is displayed.
    5. Set parameters for the AP system profile. Table 1-197 describes the parameters for creating an AP system profile.

      Figure 1-256  AP System Profile

      Figure 1-257  Dual-link Configuration

      Figure 1-258  LLDP

      Figure 1-259  Eapol

      Figure 1-260  AP Alarm

      Figure 1-261  Log Backup

      Figure 1-262  Spectrum Analysis

      Figure 1-263  PoE settings

      Figure 1-264  Others

      Table 1-197  Parameters for creating an AP system profile

      Parameter

      Description

      AP System Profile

      Name of the new AP system profile, which cannot be modified.

      Service holding upon link disconnection

      Whether to enable or disable service holding upon link disconnection.

      Offline AP permit access of new STAs

      Whether to enable or disable the APs in fault state to allow access of new STAs.

      Role in mesh networking

      Role of an AP on the Mesh network.

      MPP active reselection

      Whether to enable or disable active MPP reselection.

      MTU

      Maximum transmission unit (MTU) on an Ethernet interface.

      Dual-link Configuration
      AC priority AC priority.
      IP address of the backup AC IP address of the standby AC.
      LLDP
      Delay of enabling LLDP

      Delay in re-enabling LLDP on APs.

      Working mode

      LLDP working mode on APs.

      Packet transmission delay

      Delay after which an AP sends LLDP packets to neighboring devices.

      Packet transmission interval

      Interval at which an AP sends LLDP packets to neighboring devices.

      TTL of packets

      Number of hold time intervals during which AP information can be saved on a neighboring device.

      Neighbor information report interval

      Interval at which an AP reports LLDP neighbor information to an AC.

      Eapol
      Eapol-response packet conversion

      EAPoL-response packet conversion method.

      Eapol-response packet encapsulation

      EAPoL-response packet encapsulation method.

      Eapol-response MAC address

      Unicast MAC address of EAPoL-response packets.

      This parameter must be set when Eapol-response packet encapsulation is set to Unicast packets with specific MAC addresses.

      Eapol-start packet conversion

      EAPoL-start packet conversion method.

      Eapol-start packet encapsulation

      EAPoL-start packet encapsulation method.

      Eapol-start MAC address

      Unicast MAC address of EAPoL-start packets.

      This parameter must be set when Eapol-start packet encapsulation is set to Unicast packets with specific MAC addresses.

      AP Alarm
      Alarm suppression

      Whether to enable the alarm suppression function for APs.

      Alarm suppression interval

      Interval during which alarms are suppressed on APs.

      High temperature alarm threshold

      High temperature alarm threshold for APs.

      Low temperature alarm threshold

      Low temperature alarm threshold for APs.

      CPU usage alarm threshold

      CPU usage alarm threshold for APs.

      Memory usage alarm threshold

      Memory usage alarm threshold for APs.

      Log Backup
      IP address of the log backup server

      IP address of the log server.

      Log backup level

      Severity of AP logs to be backed up.

      Spectrum Analysis
      Server IP/port number

      IP address and port number of a spectrum server.

      Use AC for transparent data transmission

      Whether an AC is used for transparent data transmission:

      • OFF: Data is transmitted directly to the spectrum server

      • ON: Data is transmitted to the spectrum server through an AC.

      AC port number

      Port number used by an AC to receive the spectrum information (UDP packets) sent by an AP when the AC is used for transparent data transmission.

      Aging time of non-Wi-Fi devices

      Aging time of non-Wi-Fi devices on an AC during spectrum analysis.

      PoE Settings
      Maximum output power Maximum output power of the central AP.
      PoE reserved power percentage Percentage of reserved PoE power to the available PoE power on the central AP.
      Alarm threshold of PoE power consumption percentage Alarm threshold of PoE power consumption percentage.
      IEEE802.3af switching Whether to enable a central AP to provide PoE power in compliance with IEEE 802.3af.
      Allow high inrush current during power-on Whether to enable the central AP to allow high inrush current during power-on.
      Others
      Manage VLAN

      Management VLAN for APs.

      Dynamic blacklist aging time

      Aging time of a dynamic blacklist entry.

      STelnet

      Whether to allow or forbid STelnet login.

      Telnet

      Whether to allow or forbid Telnet login.

      Console

      Whether to allow or forbid console port login.

      SFTP

      Whether to allow or forbid SFTP login.

      Indicator

      Whether to turn on or off AP indicators.

      Offline VAP management

      Whether to enable or disable the offline VAP management function.

      Antenna combined output

      Whether to enable or disable combined output of antenna signals.

      Only the AP9132DN supports this function.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify an AP system profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP System Profile. The AP System Profile List page is displayed.
    2. Click the name of the AP system profile that you want to modify. The AP System Profile page is displayed.
    3. Modify parameters for the AP system profile. For the parameter description, see Table 1-197.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete an AP system profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP System Profile. The AP System Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > AP > AP System Profile. The AP System Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

  • Configure a profile referenced in an AP system profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP System Profile. The AP System Profile List page is displayed.
    2. In the navigation tree, click to the left of AP System Profile to expand the AP system profile list. Click to the left of an AP system profile name to view the names of the profiles referenced in the AP system profile.
    3. Click any profile referenced by the AP system profile. The configuration page of the referenced profile is displayed on the right. You can select another profile from the drop-down list and set the profile parameters. For descriptions of the profile parameters, see its configuration page.
    4. Click Apply. In the Info dialog box that is displayed, click OK.

AP Wired Port Profile

Context

An AP wired port profile allows you to manage and configure wired interfaces of APs. You can configure wired port parameters in the AP wired port profile to facilitate AP management.

Procedure

  • Create an AP wired port profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Profile. The AP Wired Port Profile List page is displayed.
    2. Click Create. The Create AP Wired Port Profile page is displayed.
    3. Enter the name of the new AP wired port profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new AP wired port profile is displayed.
    5. Set parameters for creating an AP wired port profile. Table 1-198 describes the parameters for creating an AP wired port profile.



      Table 1-198  Parameters for creating an AP wired port profile

      Parameter

      Description

      AP Wired Port Profile

      Name of the AP wired port profile, which cannot be modified.

      Enable Eth-trunk

      Whether to enable Eth-Trunk.

      Port mode
      Operating mode of a wired interface.
      • None: default mode

      • root: root mode

      • endpoint: endpoint mode

      • middle: middle mode

      NOTE:
      By default,
      • On a common AP: Its GE interfaces work in root mode, Ethernet interfaces in endpoint mode, and Eth-Trunk interfaces in root mode.
      • On a central AP: Its uplink GE interfaces in root mode and downlink GE interfaces work in middle mode.
      • On an R230D: Its Ethernet interface works in root mode.
      • On an R240D: Its Ethernet interface works in endpoint mode and GE interface in root mode.
      • On an R250D, R250D-E, AP2050DN, and AP2050DN-E: Their uplink GE interfaces work in root mode and downlink GE interfaces in endpoint mode.
      Port description

      Port description.

      User isolation mode

      User isolation mode on a wired interface.

      If Port mode is set to endpoint, you need to set this parameter.

      STP

      Whether to enable STP on the wired interface.

      STP-triggered port shutdown

      Whether STP-triggered port shutdown is enabled on the AP's wired interface.

      Port recovery time

      Auto-recovery interval for an AP's wired interface on which the STP-triggered port shutdown function is enabled.

      DHCP trusted port

      Whether to enable the DHCP trusted port function.

      Address learning

      Whether terminal address learning is enabled on the AP's wired interface.

      IP packet binding check

      Whether IP packet binding check is enabled on the AP's wired interface.

      ARP packet binding check

      Whether dynamic ARP inspection (DAI) is enabled on the AP's wired interface.

      ACL for inbound packet filtering

      ACL for filtering incoming packets.

      Click . Search for and select an ACL in ACL for inbound packet filtering.

      ACL for outbound packet filtering

      ACL for filtering outgoing packets.

      Click . Search for and select an ACL in ACL for outbound packet filtering.

      Port PVID

      PVID of the wired interface.

      Added VLAN ID

      ID of the VLAN to which the wired interface is added.

      Mode

      Mode used to add the wired interface to a VLAN. Tagged and untagged modes are supported.

      Packet filtering

      The following parameters are available only after IPv4 packet filtering is selected.

      Inbound ACL

      ACL for filtering incoming packets.

      Click . Search for and select an ACL in ACL for inbound packet filtering.

      Outbound ACL

      ACL for filtering outgoing packets.

      Click . Search for and select an ACL in ACL for outbound packet filtering.

      Storm Control
      Broadcast packet rate limit Maximum broadcast traffic volume allowed on the AP's wired interface.
      Unicast packet rate limit Maximum unknown unicast traffic volume allowed the AP's wired interface.
      Multicast packet rate limit Maximum multicast traffic volume allowed on the AP's wired interface.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify an AP wired port profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Profile. The AP Wired Port Profile List page is displayed.
    2. Click the name of the AP wired port profile that you want to modify. The AP Wired Port Profile page is displayed.
    3. Modify parameters of the AP wired port profile. Table 1-198 describes the parameters for modifying an AP wired port profile.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete an AP wired port profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Profile. The AP Wired Port Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Profile. The AP Wired Port Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

  • Configure the profiles that are referenced by the AP wired port profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Profile. The AP Wired Port Profile List page is displayed. Click next to AP Wired Port Profile. The AP wired port profile name is displayed. Click next to the specified AP wired port profile to view the profiles that are referenced by the AP wired port profile.
    2. Click any profile referenced by the AP wired port profile. The configuration page of the referenced profile is displayed on the right. You can select another profile from the drop-down list and set the profile parameters. For descriptions of the profile parameters, see its configuration page.
    3. Click Apply. In the Info dialog box that is displayed, click OK.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000114003

Views: 38465

Downloads: 995

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next