No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720GFR, S2700, S5700, and S6720 V200R010C00 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN Location

WLAN Location

WLAN Location Profile

  • Create a location profile.
    1. Choose Configuration > Wireless Services > Profile > WLAN Location > WLAN Location Profile. The WLAN Location Profile List page is displayed.
    2. Click Create. The Create WLAN Location Profile page is displayed.
    3. Enter the name of the new location profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new location profile is displayed.



    5. Set parameters for creating a location profile. Table 1-204 describes the parameters for creating a location profile.

      Table 1-204  Parameters for creating a location profile

      Parameter

      Description

      WLAN Location Profile

      Name of the location profile, which cannot be modified.

      Source IP address of outgoing packets

      Source IP address in location packets reported to the AC. This parameter takes effect only in AeroScout and Ekahau positioning.

      AeroScout Location

      Tag location

      Whether to enable WLAN location of AeroScout tags.

      STA location

      Whether to enable WLAN location of AeroScout MUs.

      Packet aggregation interval

      Interval of AeroScout tag location packet aggregation and MU packet aggregation.

      Data report mode

      Mode in which AeroScout location packets are reported.

      • Through AC: An AP reports AeroScout location packets to an AC, and the AC forwards them to the AeroScout location server.
      • AP: An AP directly reports AeroScout location packets to the AeroScout location server without sending them to the AC.
      NOTE:

      Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.

      Server port number

      Port number of the AeroScout location server.

      AC port number

      AC port number used to communicate with the AeroScout location server.

      Ekahau Location

      Tag location

      Whether to enable WLAN location of Ekahau tags.

      Data report mode

      Mode in which Ekahau location packets are reported.

      • Through AC: An AP reports Ekahau location packets to an AC, and the AC forwards them to the Ekahau location server.
      • AP: An AP directly reports Ekahau location packets to the Ekahau location server without sending them to the AC.
      NOTE:

      Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.

      Server IP/port number

      IP address and port number of the Ekahau location server.

      AC port number

      AC port number used to communicate with the Ekahau location server.

      Private Location

      STA location

      Whether to enable STA location.

      Data report interval

      Interval for reporting STA location packets.

      Data report mode

      Mode in which STA location packets are reported.

      • Through AC: An AP reports STA location packets to an AC, and the AC forwards them to the STA location server.
      • AP: An AP directly reports STA location packets to the STA location server without sending them to the AC.
      NOTE:

      Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.

      Server IP/port number

      IP address and port number of the STA location server.

      AC port number

      AC port number used to communicate with the STA location server.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify a location profile.
    1. Choose Configuration > Wireless Services > Profile > WLAN Location > WLAN Location Profile. The WLAN Location Profile List page is displayed.
    2. Click the name of the location profile that you want to modify. The location profile configuration page is displayed.
    3. Modify parameters in the location profile. Table 1-204 describes the parameters for modifying a location profile.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete a location profile.
    1. Choose Configuration > Wireless Services > Profile > WLAN Location > WLAN Location Profile. The WLAN Location Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > WLAN Location > WLAN Location Profile. The WLAN Location Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000114003

Views: 51160

Downloads: 1061

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next