No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Interoperation and Replacement Guide

This document provides typical configuration examples for interoperation between Huawei switches and mainstream IP phones, firewalls, routers, Microsoft NLB servers, multi-NIC servers, Cisco switches, and SolarWinds.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Planning

Network Planning

NOTE:
  • This document is written based on lab operations. The network diagram and data planning are provided for reference only.
  • This document provides only key configurations required for interoperation between Huawei switches and SolarWinds. Basic network configurations such as VLANs, IP addresses, and routes are not provided. You can configure these parameters based on your networking requirements.
  • The SolarWinds Orion Platform 2016.2.100 and Network Configuration Manager (NCM) 7.5.1 are used in this document.

Network Diagram

Figure 6-1  Network diagram for interoperation between Huawei switches and SolarWinds

Data Plan

Table 6-1  SNMP and Telnet data plan
Item Data
SNMP
  • SNMP version: SNMPv2c
  • Name of the SNMP read-write community: Huawei@2018
  • Destination host to which traps are sent: 192.168.26.232
  • SNMP trap function: enable the SNMP trap function of all modules to send traps to SolarWinds
Telnet
  • Authentication mode: AAA, that is, user name and password authentication
  • User name: huawei
  • Password: Huawei@123
  • User level: 15
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000114005

Views: 178540

Downloads: 8155

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next