Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Devices to SolarWinds NCM
Context
If you want to use SolarWinds NCM to manage devices (for example, backing up or restoring configurations), configure SSH/Telnet credentials for SolarWinds NCM to manage devices and add the devices to SolarWinds NCM.
Procedure
- When adding a single device, add it to SolarWinds NCM.
- When adding automatically discovered devices, add them to SolarWinds NCM.
- If a device is added to SolarWinds but not added to SolarWinds
NCM, add this device to SolarWinds NCM.
- Select Yes from the drop-down list of Manage node(s) with NCM.
- If multiple devices are selected, you can only use the global default SSH/Telnet credentials.
- If a single device is selected, you can use the global default SSH/Telnet credentials, an existing or a created new SSH/Telnet connection profile, or SSH/Telnet credentials specified for this device.
![]()
- Select Yes from the drop-down list of Manage node(s) with NCM.
Previous
