Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF and EIGRP Interoperation and Replacement Solution
EIGRP is a Cisco proprietary protocol. Huawei switches cannot interoperate with EIGRP-enabled devices directly. To enable Huawei OSPF-enabled switches to interoperate with or replace Cisco EIGRP-enabled switches, two solutions are available.
| Solution | Description |
|---|---|
| OSPF interoperates with EIGRP | Use OSPF on Cisco EIGRP-enabled switches to exchange routing information with Huawei OSPF-enabled switches. This solution enables Huawei OSPF-enabled switches to interoperate with Cisco EIGRP-enabled switches. |
| OSPF replaces with EIGRP | Configure OSPF to replace EIGRP on Cisco switches so that all devices on the network run OSPF. This solution enables Huawei switches and Cisco switches to communicate with each other through OSPF. |
