No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Interoperation and Replacement Guide

This document provides typical configuration examples for interoperation between Huawei switches and mainstream IP phones, firewalls, routers, Microsoft NLB servers, multi-NIC servers, Cisco switches, and SolarWinds.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Comparison Between VCMP and VTP

Comparison Between VCMP and VTP

The differences between Cisco VTP and Huawei VCMP are as follows.
  • Multiple servers can exist in a Cisco VTP domain, and any switch can function as a VTP server. VTP servers synchronize information to each other.
  • Only one switch in a VCMP domain functions as the VCMP server to control all VLAN configurations in the domain.
Table 5-9  Differences in command formats

Function

Command on Huawei Switches

Command on Cisco Switches

Description

Configure the device role or mode.

vcmp role { client | server | silent | transparent } vtp mode { client | off | server | transparent }

A switch used as a VCMP silent in a Huawei VCMP domain is similar to the switch in off mode in a Cisco VTP domain, and directly discards received protocol packets.

Configure the domain name.

vcmp domain domain-name vtp domain domain-name

-

Configure the domain ID.

vcmp device-id device-id

Not supported

Cisco VTP does not support the configuration.

Configure an authentication password for the domain.

vcmp authentication sha2-256 password password vtp password password

-

Configuring the protocol version number.

Not supported

vtp version number

Huawei VCMP does not support the configuration.

Check the protocol status.

display vcmp status show vtp status

-

Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000114005

Views: 177349

Downloads: 8152

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next