No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Interoperation and Replacement Guide

This document provides typical configuration examples for interoperation between Huawei switches and mainstream IP phones, firewalls, routers, Microsoft NLB servers, multi-NIC servers, Cisco switches, and SolarWinds.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring SSH/Telnet Credentials for SolarWinds NCM to Manage Devices

Configuring SSH/Telnet Credentials for SolarWinds NCM to Manage Devices

Overview of SSH/Telnet Credentials

If you want to use SolarWinds Network Configuration Manager (NCM) to manage devices (for example, backing up or restoring configurations), configure SSH/Telnet credentials for SolarWinds NCM to manage devices and add the devices to SolarWinds NCM.

SSH/Telnet credentials include the login credentials (user name and password), communication transfer protocol, and transfer ports.


SSH/Telnet credentials used by SolarWinds NCM must be the same as the SSH/Telnet parameter settings on Huawei switches. Otherwise, SolarWinds NCM cannot manage the switches.

Methods of Configuring SSH/Telnet Credentials

  • Global default SSH/Telnet credentials: If you do not specify SSH/Telnet credentials when adding devices to SolarWinds NCM, SolarWinds NCM uses the global default SSH/Telnet credentials to manage the devices.
  • SSH/Telnet connection profile: SolarWinds NCM can use one SSH/Telnet connection profile to manage multiple devices.


  1. Click SETTINGS > All Settings.
  2. Under PRODUCT SPECIFIC SETTINGS, click NCM Settings.

    • Configuring global default SSH/Telnet credentials

      # Under Global Device Defaults, click Global Device Defaults, set parameters as required, and click SUBMIT.

    • Creating an SSH/Telnet connection profile

      # Under Global Device Default, click Connection Profiles. Click CREATE NEW to create an SSH/Telnet connection profile. Set parameters as required and click SUBMIT.

Updated: 2019-05-15

Document ID: EDOC1000114005

Views: 178532

Downloads: 8155

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next