No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Interoperation and Replacement Guide

This document provides typical configuration examples for interoperation between Huawei switches and mainstream IP phones, firewalls, routers, Microsoft NLB servers, multi-NIC servers, Cisco switches, and SolarWinds.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appendix 2: Guide for Configuring Cisco RADIUS Authentication Server

Appendix 2: Guide for Configuring Cisco RADIUS Authentication Server

When CiscoSecure ACS is used as the RADIUS authentication server and hosts are connected to IP phones in inline mode, bind user names and passwords of IP phones to the voice VLAN on the RADIUS server, as shown in Figure 1-21.
Figure 1-21  Networking of the RADIUS server

S Switch V200R006 provides the following optimization:
  • In earlier versions of S Switch V200R006, the voice VLAN attribute (device-traffic-class=voice) is configured on the RADIUS server to identify the voice VLAN and authenticate voice services, as shown in Figure 1-22.

    In S Switch V200R006 and later versions, the voice VLAN attribute (device-traffic-class=voice) does not need to be configured. The voice-vlan X enable command is configured on the switch to identify the voice VLAN and authenticate voice services.

    Figure 1-22  Configuring the voice VLAN attribute (device-traffic-class=voice) on the RADIUS server

  • In earlier versions of S Switch V200R006, data and voice services for a VLAN on an interface can be authenticated simultaneously. In V200R006 and later versions, authentication is performed one at a time.
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000114005

Views: 178668

Downloads: 8161

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next