No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Planning

Application Planning

This section describes the application planning of InfoScanner to perform antivirus management for files in shared directories.

Table 8-8 lists data that needs to be planned before configuring InfoScanner based on the preceding requirements analysis.

Data in Table 8-8 is for reference only. Plan data based on onsite requirements.

Table 8-8  Application planning




Antivirus servers

To enable InfoScanner to provide constant antivirus protection, you are advised to configure at least the same number of antivirus servers as that of the nodes.

  • Computer name: COMPUTER-1
  • Domain: AD
  • Computer name: COMPUTER-2
  • Domain: AD

Antivirus software vendor

For details about supported antivirus software vendors, see Storage Interoperability Navigator.


IP addresses of the antivirus servers

Used for communication between antivirus servers and OceanStor 9000. The front-end service network of OceanStor 9000, antivirus servers, and AD domain servers are interconnected.
  • The IP address of AntivirusServer1 is
  • The IP address of AntivirusServer2 is

Antivirus server port ID

Communication port for providing the antivirus service

By default, the port IDs of AntivirusServer1 and AntivirusServer2 are both 26810. You are advised not to change them.

Scan authentication users

Scan authentication users are AD domain users and need to be added to AntivirusGroup (default local authentication user group in OceanStor 9000).
When the antivirus switch is enabled, scan authentication users can access storage resources in OceanStor 9000 without being authenticated, namely, they have full control.


Hot data directory

Directory Business that stores hot data is susceptible to viruses due to frequent operations. Therefore, real-time scan applies to directory Business.

  • Scan policy: Default
  • Default status: Enabled
  • Scan type: Real time

Cold data directory

Directory Storage that stores cold data will be archived regularly. Therefore, periodic scan applies to directory Storage.

  • Scan policy: strategy1
  • Default status: Enabled
  • Scan type: Periodical

Scan policy

  • Default is configured for the Business directory. Scan is performed all the day.
  • strategy1 is configured for the Storage directory. The scan period is during off-peak hours.
  • Default
    • Name: Default
    • Non- scan Period: None
    • Excluded File Types in Scan: None
    • Max. File Size for Scan: Not restricted
  • strategy1
    • Name: strategy1
    • Non-scan Period: 08:00-12:00; 13:00-18:00
    • Excluded File Types in Scan: None
    • Max. File Size for Scan: Not restricted

Isolation path

The isolation path must be a newly created level-1 directory.
This path takes effect only after Rising virtualization system security software is installed.


Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 107826

Downloads: 163

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next