No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Operations

Configuration Operations

This section uses NetBackup as an example to configure Network Data Management Protocol (NDMP) backup, meeting daily backup requirements of the financial institution.


The network has been built up and the backup server communicates normally with the OceanStor 9000 and tape library.


NDMP backup configuration process includes six steps: map a tape library, configure storage units, configure basic NDMP information, add an NDMP host (that is the OceanStor 9000), set a backup policy, and perform the backup task. Figure 13-13 shows the configuration flowchart.

Figure 13-13  Configuration flowchart


  1. Map a tape library to the backup server. For details, see the tape library-related documents.
  2. On the backup server, use NetBackup to configure storage units for storing backup data.
  3. Log in to SmartKit and configure basic NDMP information such as enabling the NDMP service and setting the port ID, write threshold, and user name and password of the NDMP service.

    By default, the port ID is 10000. To ensure that services work normally, do not change the value.

  4. On NetBackup, configure the dynamic domain name of the NDMP host and the user name and password of the NDMP service.
  5. On NetBackup, configure a backup policy.
  6. Perform the backup task.
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 110294

Downloads: 166

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next