No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating Subnets

Creating Subnets

This section describes the method of creating and configuring subnets.


Create an IPv4 or IPv6 subnet based on the type of service IP addresses. One node can belong to only one subnet.


  1. Log in to DeviceManager.
  2. Create a subnet.
    1. Choose Settings > Cluster Settings > InfoEqualizer > Subnet Management.
    2. Click Create, Create Subnet dialog box that is displayed.
    3. Select IPv4 Address or IPv6 Address for IP Address Type based on the subnet IP address type. Enter planned information as prompted and click OK.


      After creating a subnet, you cannot change its IP address type. To change its IP address type, delete the subnet and create a new one.

    4. In the Success dialog box that is displayed, click OK.

      In the subnet list, you can view the newly created subnets.

    5. Repeat 2.b to 2.d to create all necessary subnets.
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 108007

Downloads: 163

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next