No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Planning

Application Planning

This section explains how a financial institution uses Network Data Management Protocol (NDMP) backup to complete routine backup services in terms of network planning and service planning.

Network Planning

The NDMP backup feature of the OceanStor 9000 only supports the 3-way networking mode, as shown in Figure 13-12.

Figure 13-12  Backup network planning

After the network is built up, plan IP addresses and ensure that the backup server can communicate with the OceanStor 9000 and tape library. Table 13-8 provides an example that lists the planned IP addresses.

Table 13-8  IP address planning

Item

IP Address

Subnet Mask

Gateway

Cluster management IP address

10.169.0.10

255.255.0.0

10.169.0.1

Backup server IP address

10.192.0.50

255.255.0.0

10.192.0.1

Tape library IP address

10.192.0.60

255.255.0.0

10.192.0.1

NOTE:
To ensure that communication between devices is normal, configure route information based on actual network planning.

Service Planning

Based on the preceding backup requirement analysis, service planning specific to NDMP backup is provided. Backup software is NetBackup 7.0 here. To meet more service requirements using other features, see the OceanStor 9000 related documents to complete corresponding planning and configuration.

Table 13-9 illustrates the backup service planning of the financial institution.

Table 13-9  Service planning

Planning Item

Description

Planned Value

Snapshot-based backup

Backup is complete based on snapshots. After backup, the snapshots can be deleted.

Enable

Write threshold

During data recovery, if write threshold is reached, recovery stops.

85%

Backup directory

File directories that are backed up using the NDMP backup feature.

The value varies depending on site requirements, such as /Data.

Backup mode

Backup modes include full backup, differential incremental backup, and cumulative incremental backup. Backup data and backup time may vary depending on the backup mode you use.

  • Use full backup when initially enabling NDMP backup.
  • Use differential incremental backup for daily data backup.

Backup period

A backup period is self-definable. One backup task is automatically performed within one backup period.

The backup period of daily backup is 24 hours.

Translation
Download
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 79865

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next