No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Operations

Configuration Operations

This section describes the configuration procedure after the service planning.

Procedure

  1. Set a shared directory for an OceanStor 9000 cluster.
    1. Log in to the DeviceManager of cluster 1.
    2. Choose Provisioning > Create Share. The Share Settings page is displayed.
    3. In Share type, select NFS(Linux/UNIX/MAC). In Share path, select the created storage path of the video, using /Camera_a for example.
    4. Click Next. The Set Permissions page is displayed.
    5. Click Add. Set the parameters of the UniformView client, as shown in Figure 10-7.

      • Write Mode is irrelevant to UniformView. Retain the default value.
      • The directory is mounted to UniformView in read-only mode whatever value Permission Constraint is set to. Retain the default value.
      • Set Root Permission Constraint to no_root_squash.
      Figure 10-7  Client parameters

    6. Click Next. Then click Finish.
    7. Repeat the preceding substeps to set shared directories for clusters 2 and 3.
  2. Mount storage domains to the shared directories.
    1. Log in to the UniformView client as the root user.
    2. In the installation directory, create an .ini UniformView configuration file.

      cd /home

      vi UniformView.ini

    3. Write the mounting name, shared directory name, and cluster dynamic service IP address of each of the three OceanStor 9000 clusters in the configuration file in the format of Mounting name#Shared directory name#Cluster dynamic service IP address.

      C20_3P_1231408119237060#Camera_a#192.168.1.10
      C20_3P_1231408119237061#Camera_b#192.168.1.20
      C20_3P_1231408119237062#Camera_c#192.168.1.30

    4. Run the mount command to mount storage domains to the shared directories.

      UniformView mount /home/UniformView.ini /home/UniformView.ini is the absolute path of UniformView.ini.

Translation
Download
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 74958

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next