No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unmounting Storage Domains

Unmounting Storage Domains

When an OceanStor 9000 cluster is brought offline or deleted, the storage resources of the cluster must be deleted from the global namespace of the UniformView client.


The umount command or del command can be used to unmount storage domains from the UniformView client. Running the umount command, you can unmount multiple storage domains from the UniformView client through the configuration file. Running the del command, you can unmount only one storage domain from the UniformView client at a time in the following format: Mounting name#Shared directory#Cluster dynamic service IP address.


  • Use the umount command

    1. Log in to the UniformView client as the root user.
    2. In the installation directory, create an .ini UniformView configuration file.

      vi UniformView.ini

    3. Write the mounting name, shared directory name, and cluster dynamic service IP address of each storage domain in the configuration file in the format of Mounting name#Shared directory name#Cluster dynamic service IP address. The following provides an example:
    4. Run the umount command.

      UniformView umount /home/UniformView.ini In the command, /home/UniformView.ini is the absolute path of the UniformView configuration file.

      # UniformView umount /home/UniformView.ini
      umount success

    You can use command UniformView umountall to unmount all storage domains. In this case, the configuration file is not needed anymore.

  • Use the del command

    1. Log in to the UniformView client as the root user.
    2. Run a del command to unmount a storage domain from the UniformView client.

      UniformView del Mounting name#Shared directory#Cluster dynamic service IP address

      # UniformView del C20_001#NFS_DirA#
      del success!


  1. Log in to the UniformView client as the root user.
  2. View the mounting root directory /mnt/UniformView to check whether the shared directory is deleted. If the shared directory fails to be deleted, check the UniformView configuration file and try again.
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 108086

Downloads: 163

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next