No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Planning

Application Planning

This section describes how to use InfoEqualizer to plan networks and services.

Network Planning

Figure 2-27 shows the subnets and zones of the OceanStor 9000 for the meteorology bureau.

Figure 2-27  InfoEqualizer network planning

After setting up a network, you need to plan all IP addresses for the storage system. Table 2-21 lists the IP address planning.

Table 2-21  Storage system IP address planning


IP Address

Prefix and Subnet Mask


Dynamic service IP address pool

Subnet 1: FEC0:1::2 to FEC0:1::5

Subnet 2: to

Prefix of subnet 1: 64

Subnet mask of subnet 2:

Subnet 1: FEC0:1::1

Subnet 2:

Static service IP address

Subnet 1: FEC0:1::12 to FEC0:1::15

Subnet 2: to

DNS IP address on a subnet

Subnet 1: FEC0:1::10

Subnet 2:


IP address of an external DNS server

Subnet 1: FEC0:1::20

Subnet 2:

Subnet 1: FEC0:1::1

Subnet 2:

Management IP address


Prefix: 64


Service Planning

Based on the storage requirement analysis, this section describes how to use the InfoEqualizer feature to plan services. If other features or services are used, plan services based on site requirements. For details, see related OceanStor 9000 documentation. Table 2-22 describes the storage service planning.

Table 2-22  Service planning



Planned Value


Configure two subnets.




Each subnet corresponds to a zone for client access.

zone1: corresponds to subnet1 and contains 2 nodes.

zone2: corresponds to subnet2 and contains 2 nodes.

Domain name

Configure dynamic and static domain names, as well as subdomain names for zones.

Dynamic domain name:

Static domain name:

Subdomain name of zone1: zone1

Subdomain name of zone2: zone2

Client load balancing policy

The load balancing policy is used when a client accesses the OceanStor 9000.


Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 108908

Downloads: 166

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next