No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing Static Front-end service IP Addresses

Changing Static Front-end service IP Addresses

This section describes the method of adjusting Static front-end service IP addresses.

Context

Dynamic and static Front-end service IP Addresses on one node must be in the same network segment and be either IPv4 or IPv6 addresses.

After a node is migrated to a newly created zone, change the static service IP address of the node to subnet IP address of the zone.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Cluster Settings > InfoEqualizer > Node Management.
  3. In the node list, select a node and click Properties.
  4. In the Node Properties dialog box that is displayed, change Static Service IP Address to the subnet IP address of the zone.
  5. In the Warning dialog box that is displayed, select I have read the warning message carefully and click OK.
  6. In the Execution Results dialog box that is displayed, click Close.

    NOTE:
    In the process of modifying the front-end IP address, nodes may be temporarily disabled state and may cause service abnormal alarm. After modifying all the front-end IP address, the node state will be normal and the alarm will be cleared automatically.

  7. Repeat 3 to 6 to change the static front-end IP address for each node.
Translation
Download
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 79052

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next