No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restrictions

Restrictions

This section describes the impact of the InfoLocker feature on system performance, restrictions on the feature application, and interaction between the feature and other features.

Impact on System Performance

Asynchronously appending data to WORM files deceases system performance, but only the access and write of WORM files are affected.

Application Restrictions

  • Only the enterprise compliance mode is supported.
  • Only empty directories can be configured as WORM root directories.
  • WORM root directories do not support nesting. Once you have created a WORM directory, the properties of the directory apply to its subdirectories, newly created directories, and files.
  • Modified WORM configurations apply to new files or subdirectories only. Parent directories and files are not affected.
  • The WORM clock cannot be changed once being set.
  • Once a directory for storing WORM logs is set, it cannot be changed or deleted and its parent directory cannot be deleted either.
  • The directory for storing WORM logs cannot be set retention period.
  • Do not configure a quota for the directory storing WORM logs. Otherwise, logs may fail to be recorded.
  • Do not create hard links to files in a WORM directory.

Interaction with Other Features

Table 7-5 describes the interaction between the InfoLocker feature and other features.

Table 7-5  Interaction between the InfoLocker feature and other features

Feature

Interaction with InfoLocker

InfoReplicator

  • If InfoLocker is enabled, the InfoLocker property of the primary directory of remote replication must be the same as that of the secondary directory.
  • When the InfoLocker clock difference of two systems is smaller than 60 minutes, the InfoLocker file is replicated to the other system and the InfoLocker property keeps unchanged.

InfoStamper

After a snapshot rollback, the InfoLocker function of the directory fails.

InfoScanner

You are advised not to configure InfoLocker for a scan directory.

Translation
Download
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 83845

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next