No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Parameter Description

Parameter Description

This section describes major parameters of InfoEqualizer configuration.

Table 2-25 describes the parameters.

Table 2-25  Parameter Description of InfoEqualizer



Load balance

Indicates a client load balancing policy. Client access requests can be evenly distributed among all nodes based on the specified policy.

The default balancing policy is round robin.

Dynamic service IP address

Indicates a dynamic IP address assigned to the front-end service network port of a node.

Number of dynamic IP addresses of the front-end service network port

The change infoequalizer business_iface_min_dynip command can be used to change the number of dynamic IP addresses assigned to each front-end service network port.

Static service IP address

Indicates a fixed IP address assigned to the front-end service network port of a node.

Dynamic domain name

Indicates the domain name that is resolved to return the dynamic service IP address.

Static domain name

Indicates the domain name that is resolved to return the static service IP address.


You can add system nodes to different subnets and configure dynamic and static service IP addresses for the subnets to provide file sharing services to clients connecting to the subnets.

The default subnet is default.

Internal DNS server IP address

Used to provide the domain name resolution service in a subnet.

The DNS service IP address of InfoEqualizer is the internal DNS server IP address of default.

IP address pool

Indicates a range of dynamic service IP addresses that can be allocated to all nodes on subnets.


Nodes a subnets can be divided into zones, and different load balancing policies can be configured for zones.

The default zone is root.

Sub domain name

Indicates the property of a zone. A sub domain name and a dynamic or static domain name comprise a complete zone domain name. A sub domain name can be used to access file sharing services on nodes in zones.

The sub domain name of default zone is default. Specially, nodes in root zone can be accessed by using only InfoEqualizer Dynamic domain name or Static domain name too.

Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 102675

Downloads: 162

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next