No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Planning

Configuration Planning

This section describes the networking and service planning of InfoRevive features of OceanStor 9000.

Network Planning

Plan the network based on the analysis of customer requirements. Figure 9-3 shows the network diagram.

NOTE:
InfoRevive is purpose-built for the video surveillance scenario, and is usually used together with UniformView and eSight to meet the demand on unified monitoring. If only InfoRevive needs to be enabled, ensure that its license is available and configure InfoRevive by following instructions in Configuration and Management.
Figure 9-3  Video surveillance network diagram

An OceanStor 9000 cluster is deployed in each district to store video surveillance data. A shared directory is configured in the cluster.eSight is deployed in the network management center of the head office to centrally manage the OceanStor 9000 clusters in the three districts. A UniformView client is deployed in the monitoring center of the head office. The shared directories of the three storage clusters are mounted to the UniformView client. The monitoring platform can centrally monitor all ATM service points in city A by accessing the mounting root directory of UniformView.

Service Planning

Plan services based on the analysis of customer requirements. Figure 9-4 shows the process of service planning.

Figure 9-4  Configuration process

Table 9-5 describes data planning.

Table 9-5  Data planning

Parameter

Planned Value

OceanStor 9000

Cluster dynamic service IP address

Cluster 1: 192.168.1.10

Cluster 2: 192.168.1.20

Cluster 3: 192.168.1.30

Mounting name

Cluster 1: C20_3P_1231408119237060

Cluster 2: C20_3P_1231408119237061

Cluster 3: C20_3P_1231408119237062

Storage directory of video data

Cluster 1: /Camera_a

Cluster 2: /Camera_b

Cluster 3: /Camera_c

UniformView client

IP address

10.110.10.10. Ensure that the IP address and the IP addresses of all OceanStor 9000 clusters' front-end service networks can ping each other.

Mounting root directory

/mnt/UniformView

InfoRevive

Fault-tolerance mode

Fault-tolerance read and write

eSight

IP address

192.168.1.200. Ensure that the IP address and the management IP addresses of all OceanStor 9000 clusters can ping each other.

Translation
Download
Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 70191

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next