No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 File System Feature Guide 12

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Planning

Application Planning

This section describes how to use InfoEqualizer to plan networks and services for the program production center.

Network Planning

The program production center's network requires six nodes to support two types of services (HD and SD services). Figure 2-15 shows the network diagram.

Figure 2-15  Planned network diagram

After establishing the network, plan IP addresses for the storage system to ensure that the two subnets are connected to the storage system correctly. It is recommended that the number of dynamic IP addresses be the number of ports connected to the front-end network. Table 2-13 describes the IP address planning.

Table 2-13  Storage system IP address planning


IP Address

Subnet Mask


Dynamic service IP address pool to

Static service IP address to

InfoEqualizer DNS configuration


the External DNS server IP address

Management IP address

Service Planning

Based on the storage requirement analysis, use the InfoEqualizer feature to plan services. If other features or services are used, plan services based on site requirements. For details, see related OceanStor 9000 documentation. Table 2-14 describes the storage service planning.

Table 2-14  Service planning



Planned Value


Create a new zone. The root zone and the new zone process access requests from HD and SD service clients separately.

root: 2 nodes

zone1: 4 nodes

Domain name

Configure dynamic and static domain names, as well as subdomain names for zones.

Dynamic domain name:

Static domain name:

Subdomain name of zone1: hd

Subdomain name of root is no need to config: default

Client load balancing policy

Configure different load balancing policies for the two zones.

root: comprehensive node load

zone1: node throughput

Updated: 2019-06-27

Document ID: EDOC1000122519

Views: 102394

Downloads: 162

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next