No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying a Cluster Group

Modifying a Cluster Group

This section describes how to modify cluster group information.


  1. Log in to DeviceManager.
  2. Choose Settings > Storage Region Settings > Region Information Configuration > Cluster Group.
  3. In the cluster group list, select the cluster group that you want to modify and click Modify.
  4. In the Modify Cluster Group dialog box that is displayed, modify the following parameters and click OK.

    Table 6-13 lists related parameters.

    Table 6-13  Cluster group parameters





    Cluster group name

    [Possible value]

    A string of 1 to 127 characters, including letters, digits, hyphens (-), and underscores (_). It must start with a letter and cannot end with a hyphen (-) or an underscore (_).




    Cluster group description

    [Possible value]

    Information containing 0 to 255 characters.


    The cluster group consists of Region01_AZ01_Cluster01 and Region01_AZ02_Cluster01.

    Replication Priority

    Data replication priority in the cluster group


    High, Medium, Low, Automatic, Disable.




    Owning AZ of cluster 1 in the cluster group


    It cannot be modified after being enabled.

    [Possible value]

    The name of an existing AZ

    Cluster 1

    Active cluster of the cluster group


    It cannot be modified after being enabled.

    [Possible value]

    The name of a cluster in the AZ

Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 12125

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next