No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Authentication Information

Configuring Authentication Information

Before centrally managing clusters, you need to configure authentication information about clusters. Such information is used for authentication in public cloud and private cloud scenarios.

Procedure

  • IAM Authentication Settings
    1. Log in to DeviceManager.
    2. Choose Settings > Storage Settings > Object Storage Service > Authentication Settings.
    3. Configure IAM authentication information and click Save.

      Table 11-1 describes related parameters.

      Table 11-1  IAM authentication parameters

      Parameter

      Description

      Value

      URL

      URL of the IAM authentication server.

      [Value range]

      • The total length of the URL cannot exceed 255 characters.
      • The URL must contain at least two levels of domain names. Each level of the domain name contains a maximum of 63 characters, including uppercase letters, lowercase letters, digits, hyphens (-), and periods (.). A child domain name cannot start or end with a hyphen (-), and a top-level domain name cannot contain a hyphen (-).
      • IPv4 and IPv6 addresses are supported.
      • Ports 1 to 65535 are supported.
      • The path supports the RFC3986 standard, that is, supports uppercase letters, lowercase letters, digits, and special characters including !#$&'()*+,/:;=?@[]-_.~.

      [Example]

      192.168.159.200:30443 or www.test.com:30443

      Access Protocol

      Protocol used to access the IAM authentication server.

      [Example]

      https

      UserName

      User name used to log in to the IAM authentication server.

      [Value range]

      The user name contains 1 to 127 characters.

      Password

      Password of the logged in user.

      [Value range]

      The password contains 8 to 63 characters.

      Domain ID

      Domain ID of the IAM authentication server.

      [Value range]

      The domain ID contains 1 to 127 characters.

      Project Name

      Project name of IAM authentication.

      [Value range]

      The project name contains 1 to 63 characters.

  • KeyStone Authentication Settings
    1. Log in to DeviceManager.
    2. Choose Settings > Storage Settings > Object Storage Service > Authentication Settings.
    3. Configure Keystone authentication information and click Save.

      Table 11-2 describes related parameters.

      Table 11-2  Keystone authentication parameters

      Parameter

      Description

      Value

      URL

      URL of the Keystone authentication server.

      [Value range]

      • The total length of the URL cannot exceed 255 characters.
      • The URL must contain at least two levels of domain names. Each level of the domain name contains a maximum of 63 characters, including uppercase letters, lowercase letters, digits, hyphens (-), and periods (.). A child domain name cannot start or end with a hyphen (-), and a top-level domain name cannot contain a hyphen (-).
      • IPv4 and IPv6 addresses are supported.
      • Ports 1 to 65535 are supported.
      • The path supports the RFC3986 standard, that is, supports uppercase letters, lowercase letters, digits, and special characters including !#$&'()*+,/:;=?@[]-_.~.

      [Example]

      192.168.159.200:30443/identity-admin or www.test.com:30443

      Access Protocol

      Protocol used to access the Keystone authentication server.

      [Example]

      https

      UserName

      User name used to log in to the Keystone authentication server.

      [Value range]

      The user name contains 1 to 127 characters.

      Password

      Password of the logged in user.

      [Value range]

      The password contains 8 to 63 characters.

      Domain ID

      Domain ID of the Keystone authentication server.

      [Value range]

      The domain ID contains 1 to 127 characters.

      Project Name

      Project name of Keystone authentication.

      [Value range]

      The project name contains 1 to 63 characters.

  • POE Authentication Settings
    1. Log in to DeviceManager.
    2. Choose Settings > Storage Settings > Object Storage Service > Authentication Settings.
    3. Configure POE authentication information and click Save.

      Table 11-3 describes POE authentication parameters.

      Table 11-3  POE authentication parameters

      Parameter

      Description

      Value

      Active URL

      Active URL of the POE authentication server.

      [Value range]

      • The total length of the URL cannot exceed 127 characters.
      • The URL must contain at least two levels of domain names. Each level of the domain name contains a maximum of 63 characters, including uppercase letters, lowercase letters, digits, hyphens (-), and periods (.). A child domain name cannot start or end with a hyphen (-), and a top-level domain name cannot contain a hyphen (-).
      • IPv4 and IPv6 addresses are supported.
      • Ports 1 to 65535 are supported.
      • The path supports the RFC3986 standard, that is, supports uppercase letters, lowercase letters, digits, and special characters including !#$&'()*+,/:;=?@[]-_.~.

      [Example]

      192.168.159.200:30443 or www.test.com:30443

      Standby URL

      Standby URL of the POE authentication server.

      [Value range]

      • The total length of the URL cannot exceed 127 characters.
      • The URL must contain at least two levels of domain names. Each level of the domain name contains a maximum of 63 characters, including uppercase letters, lowercase letters, digits, hyphens (-), and periods (.). A child domain name cannot start or end with a hyphen (-), and a top-level domain name cannot contain a hyphen (-).
      • IPv4 and IPv6 addresses are supported.
      • Ports 1 to 65535 are supported.
      • The path supports the RFC3986 standard, that is, supports uppercase letters, lowercase letters, digits, and special characters including !#$&'()*+,/:;=?@[]-_.~.

      [Example]

      192.168.159.200:30443 or www.test.com:30443

      Access Certificate

      Certificate of the POE authentication server.

      NOTE:
      You can use the SSH client software to log in to the system through the management floating IP address of the system, and run the sh /opt/obs/scritps/poe/getAdminInfo.sh command. In the command output, the value of AccessKey is the access certificate.

      [Example]

      None

      Security Certificate

      Certificate password of the POE authentication server.

      NOTE:
      You can use the SSH client software to log in to the system through the management floating IP address of the system, and run the sh /opt/obs/scritps/poe/getAdminInfo.sh command. In the command output, the value of SecretKey is the security certificate.

      [Example]

      None

Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 11516

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next