No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the CLI

Logging In to the CLI

This section introduces how to log in to the command-line interface (CLI). After logging in to the storage system through the CLI, you can query, set, manage, and maintain services running on the system.

Prerequisites

  • The maintenance terminal has been correctly connected to the storage system switch through a network cable.
  • The IP address of the maintenance terminal is connected to the storage system maintenance network.
  • If the maintenance terminal employs the Windows operating system, the Secure Shell (SSH) has been obtained.
    NOTE:
    This document uses PuTTY 0.63 on the Windows operating system as an example to explain how to log in to the CLI.

Procedure

  1. Run PuTTY on the maintenance terminal.
  2. Set Host Name (or IP address) to the management IP address of the storage cluster and keep the default values of other parameters.

  3. Click Open. If the connection succeeded, the following information is displayed:

    login as:

  4. Enter user name omuser and password Omuser@storage.

    NOTE:

    Omuser@storage is the default operating system password. The password is user-definable.

  5. Run cli_start -u admin.
  6. Type the password and press Enter to log in to the CLI as user admin.

    The CLI and DeviceManager share the same admin user. Your password is forcibly changed after DeviceManager is deployed. Use the new password to log in again.

    You must change the default password of default account upon delivery of the system to reduce potential security risks. You are advised to periodically change the password.

  7. Run CLI commands after the CLI prompt changes to admin:/>.

    NOTE:
    The command prompt shows the user name that has logged in to the CLI.

Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 11517

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next