No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Node's IP Address

Modifying Node's IP Address

You can modify the front-end service IP address of a node that provides the object storage service.

Prerequisites

Modifying node's IP address may interrupt the object storage service. You need to confirm that no clients are connected to the IP address before modifying it.

Context

The management IP address of OceanStor 9000 can be modified using only the CLI. The front-end service IP address of a node can be modified using DeviceManager.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Cluster Settings > Cluster Node Settings.
  3. Select a node, and click Modify IP Address.
  4. In the Modify IP Address dialog box, enter IP Address, Gateway, and Subnet Mask, and click OK.
  5. The Danger dialog box is displayed. Carefully read the contents of the dialog box and select I have read and understood the consequences associated with performing this operation.
  6. Click OK.
Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 12147

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next