No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a P12E/P25E/P36E/C36E by Using the KVM

Logging In to a P12E/P25E/P36E/C36E by Using the KVM


A video graphic array (VGA) cable, display, mouse, and keyboard can work together to play the same role as a keyboard, video, and mouse (KVM). You can connect a VGA cable to a display through a VGA port and then connect the mouse and keyboard to a storage node through their USB ports. After the display is connected, the login page of the storage node will appear. If it does not, press Enter.


  1. Connect the storage node to any port from PC1 to PC8 on the keyboard, video, and mouse (KVM).

    The P12E/P36E/P25E/C36E node is connected to a KVM in the same manner. Figure 22-4 describes how to connect a P36E node to a KVM.

    Figure 22-4  Connecting a storage node to a KVM

  2. Press a number key on the KVM to connect the storage node to the corresponding port on the KVM.

    For example, to connect the storage node to PC2 on the KVM, press 2.

  3. Enter the user name and password of the Linux operating system.

    The default password for user root is Root@storage.

    • For security purposes, after the software installation, you are advised to change the default password at your first login and periodically change the password.
    • If the KVM connected to the storage node is not delivered with the OceanStor 9000, login to the storage node may fail. If a login failure occurs, disconnect the KVM and connect a monitor and a keyboard to the storage node.

    • During the process, you can run the TMOUT=0 command to avoid automatic disconnections due to timeout.

Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 12752

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next